Loading...

QUICK LEVEL Level Meter hydrostatic

QUICK LEVEL Level Meter electro-pneumatic. For water, oil, fuel oil, urea

QUICK LEVEL Level Meter electro-pneumatic. For water, oil, fuel oil, urea
QUICK LEVEL Misuratore di livello idrostatico Riels®Instruments

Measuring principle hydrostatic
Continuous indication of level, volume and filling percentage
Measuring range up to 4000 mm
Output signal 2 alarms
Supply: 230V.
Accuracy ± 1% FS
Price from € 244,00

The level meterQUICK LEVEL is an electronic device measuring and control of the level of tanks.
It is suitable for any fluid NOT flammable, NOT explosive , NOT corrosive, compatible with the materials of the probe.
QUICK LEVEL detects the level of the tank through the development of a pressure reading, carried out by means of a probe lowered inside the reservoir.

This level meter is a fully autonomous device that requires only one power supply.
The system consists of a tube for detection of static pressure complete of terminal.
The tube with its end is inserted from the top of the tank and immersed in the liquid until it touches the bottom of the tank. It is composed of a control unit for the level display and the management of the system, housed in an enclosure of plastic material, suitable for outdoor installation, provided with display (LCD) and keyboard.

Applications

  • continuous measurement
  • Indication in height, volume, and filling percentage
  • Alarms minimum and maximum level
  • high accuracy
  • Installation Procedure intuitive software
  • simple installation
  • It can be connected to Pc

A fluid inside a tank generates on the bottom a pressure that depends on the level of the liquid (L) and from the specific weight of the liquid (D). QUICK LEVEL reads the pressure generated by the fluid through the probe, maintained on the bottom of the tank due to ballast.

Taking into account the value of the specific weight (D), characteristic of the fluid contained in the tank, QUICK LEVEL automatically calculates the height (L) of the liquid contained in the tank and displays it. Through a simple task calibration, you can enter the value of the density (D) of any fluid.
In the control unit a small electric compressor is automatically activated when needed by the microprocessor of the electronic board. This, together with the presence of a special control valve, always keeps inside the probe the correct reading conditions. A heating resistance, controlled by the microprocessor, which prevents the temperature inside the housing falls below a predetermined value, improving the accuracy of the reading and avoiding problems of condensation on the electronics. The housing of the control unit is provided with a second conduit for connecting the alarms.


Advantages

  • Indication in height, volume, and filling percentage
  • Installation Procedure intuitive software
  • Can be connected to PC
  • GSM transmission level in the tank (device on request). This system addresses the need to remotely monitor the tank level by displaying a phone or an email address at the improved situation. It applies in all cases where it is required to monitor the level without the need for a site visit. This allows a saving of time and ensure the implementation of the reading in any situation. It is possible now, by means of an interface, connect up to 12 QUICK LEVEL level indicators and transmit the data cable to the PC up to 1,000 mt. away. A mask allows you to display on the PC screen the data for level, volume,% of volume content.

Technical Characteristics

Measuring principle:
    • Hydrostatic
    Measuring range / adjustment:
      • 0÷4000 [mm]
      Outputs available:
        • 4÷20 [mA]
        • Normally open contact
        • Normally closed contact
        Operating voltage [V]:
          • 230Vac
          Ambient temperature:
            • -20°C÷+50°C
            Process connection:
              • Thread GAS
              Materials in contact with the media:
                • Brass
                • Rilsan
                Degree of protection:
                  • IP55
                  Approvals:
                    • EC Declaration of Conformity