Loading...

RIL100 Submersible Level Transmitter.

RIL100 Submersible Level Transmitter. Suitable for inert and corrosive fluids

RIL100 Submersible Level Transmitter. Suitable for inert and corrosive fluids

Principle of measurement hydrostatic
Measuring range up 0,5m to 600 mH2O
Accuracy ±0.5% FS
Output signal 4÷20 mA - 0÷10V - 0÷5V
Material steel INOX AISI316
Temperature -10÷85°C
Price from € 140,00

Hydrostatic level meter RIL100 is compact measuring device containing silicon straingauge sensor and evaluation electronics in stainless steel probe.From the probe housing comes out 2-wire cable with capillary (for atmosphericpressure compensation).
For continuous level measurement of non-aggressive liquids without gross (solid)impurities in non-pressure tanks, boreholes, wells, reservoirs and swimming pools.Suitability for other than water liquids are advised to consult with the manufacturer.

Installation is done by hanging the probe down into the measured area (tanks, boreholes).The probe is left hanging on the cable, or is placed on the bottom.
The cable includes an air compensation tubing (capillary), so the connection mustbe done in non-hermetic junction box.
In tanks where there are strong turbulences or waves, the probe should be placedin the stilling tube, behind the wall, or at least at the maximum possible distancefrom the source of turbulence.
When using other liquid than water it is needed to make the output correctionwith respect to the density of the liquid, eventually consult the applicationwith themanufacturer.

Features

Moisture-proof, anti-sweat, free of leakage troubles, IP68
Excellent resistance against impact, overload, shock and erosion
Efficient lightning protection, strong anti RFI&EMI protection
Advanced digital temperature compensation and wide working temperature scope
High sensibility, high accuracy, high frequency response and long term stabilityApplicable Scope
Building Automation System and constant pressure water supply system
Urban water supply and wastewater treatment
Liquid-level testing and control in other automation systems
Liquid-level testing and control in industrial process
Testing and control in Hydraulic and hydropower engineering


Applicable scope

Building Automation System and constant pressure water supply system
Urban water supply and wastewater treatment
Liquid-level testing and control in other automation systems
Liquid-level testing and control in industrial process
Testing and control in Hydraulic and hydropower engineering

Technical Characteristics

Measuring principle:
    • Hydrostatic
    Measuring range / adjustment:
      • 0.5 | 1 | 2.5 | 5 | 10 | 20 | 50 | 100 | 200 | 300 | 400 | 500 | 600 mH2O
      Outputs available:
        • 4÷20mA (2 wires)
          0÷10Vdc (3 wires)
          0÷5Vdc (3 wires)
        Operating voltage [V]:
          • 9÷30Vdc (2 wires)
            15÷30Vdc (3 wires)
            9÷30Vdc (3 wires)
          Operating temperature:
            • -10÷+85 [°C]
            Ambient temperature:
              • -40÷+125°C
              Materials in contact with the media:
                • Stainless steel AISI 316L
                Degree of protection:
                  • IP68
                  Approvals:
                    • EC Declaration of Conformity