Butterfly valve in brass

Butterfly valve in brass

Butterfly valve in brass
Motorized valve servocontrol with 2 or 3 points
Process connection DN 40 - 50 - 65 - 80
Operation time 50 sec.
35 Nm torque on the control
Brass materials - PTFE - FKM
Temperature 7÷100°C
Pressure up to 16bar
Degree of protection IP65 
Price on request

The motorized valve Compact is specifically used for the detection and control of:
heating zone, refrigeration with glycol, plants that use alternative energy, industrial plants with hot and cold fluids, water systems, automation systems in general.

All servocontrols Compact are designed to be directly mounted on valve bodies with ISO 5211 F05 - F07 - F10
Available in two versions:

  • 3 points without relay (switch): terminal 1 neutral phase at terminal 2 opens, closes diverted to terminal 3. Each servocamando must be driven by a single command.
  • 2 points with relay (switch): neutral terminal 1, terminal 2 fixed phase, 3 phase terminal from the command for opening. More actuators can be operated by a single command.

Both versions have an ON-OFF (fully open or fully closed)
Version 3 points without relay, if combined with a suitable command, can be stopped in the intermediate positions.

The servocontrol are equipped with:

  • voltage at terminal 4 to fully open valve to be used as a remote control (signaling opening took place, drive pump relay, etc)
  • voltage at terminal 5 fully closed valve to be used as a remote control (signaling has been closed)
  • external parts in AISI303 GVR and ottone58 for the use of the actuator in demanding environments (such as protected as standard)
  • manual opening on the servocontrol to operate the valve in the absence of electrical voltage or emergency
  • a micro auxiliary opening (clean contact) which is electrically closed when the valve is open. Its use is optional (opening complete indication, pump relay control, boiler control, PLC signal, etc)
  • a micro auxiliary closure (contact) which is electrically closed when the valve is closed. Its usually use is optional (reporting has been closed, relay control, PLC signal, etc)

They are equipped with manual opening from above to operate the valve under emergency conditions.

Technical Characteristics

Measuring principle:
    • Wafer
    Process connection:
      • From DN32 up to DN700
      Operating time:
        • 50 seconds
        Operating voltage [V]:
          • 24 [V]
            110 [V]
            230 [V]
          Operating temperature:
            • -10÷+95 [°C]
            Pressure max:
              • 6 [Bar]
              Measuring fluids:
                • Water
                • Neutral liquids
                • Oil
                Materials in contact with the media:
                  • Brass
                  • PTFE
                  Degree of protection:
                    • IP65
                      • EC Declaration of Conformity