FP70 Flow Totalizer

FP70 Multifunctional instrument for measuring flow and thermal energy in liquids and gases.

ORDER CODE:
FP70P-0

Atex approval Only safe zone

Inputs 4...20 mA, pulse, RTD or Modbus

Mouting Panel-mounted (or wall-mounted case)

Display Touchscreen LCD TFT 4”

FP70 is a computer with a 4-inch LED-backlit TFT LCD display and a resolution of 800 x 480 pixels. The panel has a resistive touch keyboard and an additional RGB LED display.

Connectivity: The product includes a USB 2.0 port on the front panel for connecting FLASH storage devices and an Ethernet port with RJ-45 connector, supports various transmission protocols such as Modbus TCP and ICMP (ping). It also has an RS-485 serial port with support for the Modbus RTU protocol.

Memory: Internally, the device has a 2 GB flash memory, enough to record data for about 2 years with a recording rate of every 5 seconds for 16 measurement channels.

Power Supply: Requires a supply voltage of 24 VDC (20...30 VDC) with a maximum consumption of 12 W. There is an internal 3.15 A delay fuse for safety.

Features: The FP70 offers a number of advanced features, including continuous data logging, the ability to configure custom alarms, and graphical display of measurement data. The device also supports remote communication for real-time monitoring and data management.

ORDER CODE:
FP70P-0

Price per Unit

€1,466.00(Vat excluded)

€1,788.52(Vat included)

Qty	Unit price (Vat excluded)	Unit price (Vat included)
1	€1,466.00	€1,788.52

Availability

20 working days

Quantity

Can't find the right configuration? Ask for a quote.

Print product sheet

CONFIGURE THE PRODUCT

In this section you will find all the variants available for this model. Improve your configuration with the drop-down menus below, select the desired quantity and click ADD TO CART

The price displayed refers to a specific configuration and varies based on the options selected.

The ordering of the variants is indicative: customize the configuration according to your needs.

Mounting

Output details

Product features
Programming method	From touch screen or via PC software
Documentation included	English instructions manual
Explosion protection	Safe zone
Relative humidity of the process environment	75 %rh
Mounting	Panel
Storage temperature	-20...+80°C
Main features	Datalogger, Data recorder, Viewing of measures with units, Total flow calculation, Istant flow calculation, Energy calculator, Volume calculation, Math channel, Optional signal output, WEB server, Modbus TCP server, USB for data download, USB settings download, E-mail allarms, Three plants monitoring (A+B+C), .csv data saving
More features	Simultaneous calculation of consumption in up to three different measurement systems (A, B, C) for separate process lines Flow and energy balancing (X, Y, Z systems) 10 measurement inputs Alarm and control functions: 4 alarm and control thresholds for each measurement channel 4 semiconductor output relays : Alarm and control functions, operation in pulse output mode with fixed pulse weight 1 or 2 optional 4-20mA analog outputs Advanced logging function enables storage of measurement results in internal 2 GB data memory TFT LCD color graphical display USB port on front panel Ethernet port (Modbus TCP protocol, www server) RS-485 port (Modbus RTU protocol) Software for displaying measurement results
Details of the signal inputs and outputs
All signal outputs available	4...20 mA, Modbus RTU, Modbus TCP
Communication interface	USB
Output details	1 x Ethernet + 1 x Modbus RTU/ASCII
Signal inputs details	The device has ten measurement inputs • 2 x RTD/I, two inputs adapted for connection of resistance temperature sensors (Pt100, Pt200, Pt500, Pt1000, Ni100, Ni1000) and transducers with a 0/4‑20mA current output • 1 x I, one input for interaction with 0/4‑20mA transducers only • 2 x I/PULS, two inputs intended for connection of transducers with a 0/4‑20mA current output or with a pulse output (range 0.001Hz … 10kHz) RTD type analog inputs Sensor type: Pt-100 x K, Ni-100 x K (K = 1 .. 11) K – multiplier, ex: for Pt-200 K = 2 Measuring range: -200 .. +850 °C for Pt100 x K-60 .. +150 °C for Ni100 x K Sensor connection: 2 or 4 wires Wire resistance compensation: Manual, in the range -99.99 .. +99.99 ꭥ Maximum resistance of the connecting wires: 50 ohms Resolution of the A/D converter: 18 bit Thermal drift: Maximum ± 0.02°C/°C Galvanic isolation between inputs: No, common potential GND for all inputs Galvanic isolation from supply voltage: 400 VAC (functional isolation) 0/4-20mA type analog inputs Signal type: 0-20mA or 4-20mA Transmitter connection: Passive (powered by the measuring point) or active converter Input resistance: 100W±10% Transmitter supply: 24 Vdc / maximum 22 mA Resolution of the A/D converter: 18 bit Thermal drift: Maximum ±50 ppm/°C Galvanic isolation between inputs: No, common potential GND for all inputs Galvanic isolation from supply voltage: 400 VAC (functional isolation) PULS type inputs (binary/pulse/frequency) Maximum input voltage: ±28 VDC Galvanic isolation between inputs: No, common potential GND for all inputs Galvanic isolation from supply voltage: 400 VAC (functional isolation) Functions: Status Detection/Pulse Counting/Frequency Measurement Measuring range: 0.001 Hz .. 10 kHz (0.001 Hz .. 1 kHz with filter capacitor) Minimum pulse width: 20 ms
Registry features
Display	Yes
Display technology	TFT
Touchscreen	Yes
Display languages	Italian, English, German, French, Pol, Spanish
Electrical data
Recovery battery	Not available
Reverse polarity protection	No
Degree of protection	IP54
Status LED	YES
Datalogger	Yes
Memory	2 GB
Export formats	.csv
Storable interval	Adjustable by the user
Insulation voltage	400 V
Mechanical data
Case material	PPE - PPOm (NORYL®) - Polyphenylene oxide
Performance data
Accuracy	For RTD input ± 0.5 °C (typically ± 0.3 °C) For 4...20mA input ±0.1% of the range (typically ±0.05% of the range) For pulse input 0.02%
Approvals
Standards and Certifications	RoHS, Directive 2014/35/EU “Low voltage Directive”, Directive 2014/30/EU “Electromagnetic compatibility Directive”
EMC applied harmonized standards	EN 61326 (For industrial applications)
CE omologation	Yes
Low voltage applied harmonized standards	EN 61010-1: 2010
Rohs applied harmonized standards	EN IEC 63000:2018
Logistics
Type of packaging	Carton BOX

Measurement techniques

See all >

March 3, 2023

Food industry

With hygienic sensor solutions made of stainless steel, Riels® Instruments meets the high hygiene requirements in the food industry. We ensure continuous and lasting safety, solving chemical and thermal resistance challenges to protect products and processes.

March 1, 2023

Water & Wastewater

Water is a precious commodity. Monitoring of water resources is very important and Riels® Instruments supplies sensors for measuring flow, level, pressure in the water and wastewater treatment sector.

March 1, 2023

Chemical & Pharmaceutical Industry

In the chemical and pharmaceutical industry, excellence requires cutting-edge technologies. Riels® Instruments, with its wide range of instruments for industrial automation, satisfies every need, guaranteeing rigorous safety and precision standards.

February 28, 2023

Oil & Gas | Offshore

Oil and gas fuel industry and the progress of civilization. In the mining and refining sector, with tankers and pipelines, safety is paramount. We are committed to ensuring high safety standards to support the oil industry and its vital role in modern society.