97479121
97479121
Product features | |
---|---|
Principle of measurement | Turbine |
Informations measured | Flow. |
Detection type | Continuous measurement |
Measurable media | Aggressive liquids without chlorine, (the indications on liquids are indicative and vary with the configuration of the product) |
Explosion protection | Safe zone |
Minimum process fluid temperature | -10 °C |
Maximum process fluid temperature | 90 °C |
Minimum process pressure | -0,7 Bar |
Maximum process pressure | 6 Bar |
Measurement type | With contact |
Ambient temperature | -10...90°C |
Sensor type | Hall-effect sensor |
Overpressure | 10 Bar |
Flow max (liquid) | 2,5 L/min |
Flow min (liquid) | 0,03 L/min |
Properties of the fluid | Aggressive, Non-conductive (µS / cm <20) |
Installation position | Vertical, Horizontal |
Flow direction | Unidirectional | Details of the signal inputs and outputs |
All signal outputs available | PNP pulses |
Signal Output Type | Pulse/frequency |
Pulse factor | 2400 imp/L | Electrical data |
Voltage type | 24 Vdc |
Type of electrical connection | M12 connector |
Reverse polarity protection | No |
Max current consumption | 15 A |
Operating voltage | 5...24 Vdc | Mechanical data |
Process connection type | Nozzle |
Diameter process connection | ø 4,0 mm |
Nominal pressure (PN) | PN6 |
Materials in contact with the measured fluid | FKM (VITON®) - Copolymer of vivilidene fluoride, PP - Polypropylene, PVDF (KYNAR®) - Polyvinylidene fluoride |
Seal materials | FKM (VITON®) - Copolymer of vivilidene fluoride |
Body material | PP - Polypropylene |
Height | 42,8 mm |
Width | 61,3 mm |
Depth | 40,2 mm |
Impeller material | PVDF (KYNAR®) - Polyvinylidene fluoride |
Bearings materials | PP - Polypropylene |
Axle/shaft materials | PVDF (KYNAR®) - Polyvinylidene fluoride |
Diameter of the nozzle | 2 mm | Performance data |
Accuracy | ± 2% Full scale |
Repeatability | ± 0,5% Full scale |
Maximum viscosity of the measured fluid | 20 mPas |
Minimum viscosity of the measured fluid | 0,5 mPas | Omologazioni |
Naval approvals | None |
Food / pharmaceutical approvals | None |
Atex approvals | None |
Standards and Certifications | RoHS, Directive 2014/35/EU “Low voltage Directive”, Directive 2014/30/EU “Electromagnetic compatibility Directive” |
EMC applied harmonized standards | EN 61326 (For industrial applications) |
CE omologation | Yes |
Low voltage applied harmonized standards | EN 61010-1: 2010 |
Rohs applied harmonized standards | EN IEC 63000:2018 | Logistics |
Type of packaging | Carton BOX |
Contains batteries | No |
country of origin | Germany |
Customs Code | 90261021 |
Gross weight | 0,135 kg |
Net weight | 0,035 kg |
Packaging volume | 0,001 m³ |
Packing length | 11 cm |
Packaging width | 5 cm |
Packaging depth | 12 cm |
Electrical connection diagram
With hygienic sensor solutions made of stainless steel, Riels® Instruments meets the high hygiene requirements in the food industry. We ensure continuous and lasting safety, solving chemical and thermal resistance challenges to protect products and processes.
Water is a precious commodity. Monitoring of water resources is very important and Riels® Instruments supplies sensors for measuring flow, level, pressure in the water and wastewater treatment sector.
In the chemical and pharmaceutical industry, excellence requires cutting-edge technologies. Riels® Instruments, with its wide range of instruments for industrial automation, satisfies every need, guaranteeing rigorous safety and precision standards.
Oil and gas fuel industry and the progress of civilization. In the mining and refining sector, with tankers and pipelines, safety is paramount. We are committed to ensuring high safety standards to support the oil industry and its vital role in modern society.