PF3A703H-F10-FS
The sensors of the PF2MC7 series, to measure the flow rate, exploit the physical principle of thermal conductivity: the fluid in contact with a foil feeds conductive material, in this case gold, removes a small amount of heat. The electric current used to keep the temperature of the plate constant, within the flow rate of the fluid in the pipeline. If properly measured and related to the type of fluid inside the pipeline, the current is able to return the flow rate value.
The bypass structure allows to isolate the sensory part of the instrument more efficiently without compromising the quality of the detection, this allows to make the instrument more resistant to humidity and micro-impurities present in the measured gas flow.
The through-tube formation of the body of the instrument allows to ensure the passage of gas through the bypass where the sensory part of the instrument is located, simultaneously ensuring a maximum pressure drop of 0.05 bar.
The PNP type output allows a direct connection with the PLC while the 4...20 mA current analogue output allows a very accurate instantaneous flow rate value to be obtained.
The response time for flow measurements can be set from 60 seconds up to 0.01 seconds.
PF3A703H-F10-FS
Price per Unit
| Qty | Unit price (Vat excluded) |
Unit price (Vat included) |
|---|---|---|
| 1 | €670.00 | €817.40 |
In this section you will find all the variants available for this model, improve your configuration with the drop-down menus below, select the desired quantity and click on "ADD TO CART or REQUEST A QUOTE"
The price displayed refers to a specific configuration and changes based on the variants selected.
The configuration follows an indicative order. Configure the product according to your needs.
