| Principle of measurement |
Gear flowsensor |
| Informations measured |
Flow. |
| Detection type |
Continuous measurement |
| Measurable media |
Food Liquids, Aggressive Liquids, Alkalis liquids, (the indications on liquids are indicative and vary with the configuration of the product) |
| Explosion protection |
Safe zone |
| Minimum process fluid temperature |
-10 °C |
| Maximum process fluid temperature |
60 °C |
| Minimum process pressure |
-0,7 Bar |
| Maximum process pressure |
10 Bar |
| Measurement type |
With contact |
| Ambient temperature |
-10...+60°C |
| Sensor type |
Hall-effect sensor |
| Overpressure |
20 Bar |
| Flow max (liquid) |
1,5 L/min |
| Flow min (liquid) |
0,033 L/min |
| Properties of the fluid |
Aggressive |
| Installation position |
Vertical, Horizontal |
| Flow direction |
Unidirectional |
| All signal outputs available |
4...20 mA |
| Signal Output Type |
Current |
| Voltage type |
24 Vdc |
| Type of electrical connection |
Connettore GDSN 207 2 pin + Ground |
| Reverse polarity protection |
No |
| Status LED |
None |
| Operating voltage |
5...24 Vdc |
| Process connection type |
Threaded BSP(F) |
| Diameter process connection |
1/4" - DN6 |
| Nominal pressure (PN) |
PN10 |
| Materials in contact with the measured fluid |
CERAMIC - Ceramics, ECTFE (HALAR®) - Fluoropolymer, FKM (VITON®) - Copolymer of vivilidene fluoride, PEEK - Polyethere therketone |
| Seal materials |
FKM (VITON®) - Copolymer of vivilidene fluoride |
| Body material |
ECTFE (HALAR®) - Fluoropolymer |
| Height |
74,5 mm |
| Width |
44 mm |
| Depth |
54 mm |
| Bearings materials |
PEEK - Polyethere therketone |
| Axle/shaft materials |
CERAMIC - Ceramics |
| Material of the gears/pistons |
PEEK - Polyethere therketone |
| Accuracy |
± 1% Full scale |
| Repeatability |
± 0,5% Full scale |
| Maximum viscosity of the measured fluid |
2000 mPas |
| Minimum viscosity of the measured fluid |
0,7 mPas |
| Naval approvals |
None |
| Food / pharmaceutical approvals |
None |
| Atex approvals |
None |
| Standards and Certifications |
RoHS, Directive 2014/35/EU “Low voltage Directive”, Directive 2014/30/EU “Electromagnetic compatibility Directive” |
| EMC applied harmonized standards |
EN 61326 (For industrial applications) |
| CE omologation |
Yes |
| Low voltage applied harmonized standards |
EN 61010-1: 2010 |
| Rohs applied harmonized standards |
EN IEC 63000:2018 |
| Type of packaging |
Carton BOX |
| Contains batteries |
No |
| country of origin |
Germany |
| Customs Code |
90261021 |
| Gross weight |
0,47 kg |
| Net weight |
0,17 kg |
| Packaging volume |
0,007 m³ |
| Packing length |
26 cm |
| Packaging width |
21 cm |
| Packaging depth |
13 cm |