Home
Products
FLOW METERS
Turbine liter counter
93N-6211/1100 96N nano turbine meter

93N-6211/1100 96N nano turbine meter

93N-6211/1100 Plastic meter for liquids without impurities

Measuring range 0,08...0,4 l/min

Process temperature 0...65°C

Signal output NPN

Process pressure -1...0,3 bar

Thanks to its compact and optimized design, the NANO turbine offers the perfect solution for use in household coffee machines. This device provides reliability and compliance with applicable food standards (NSF 169, German Food and Feed Code, and European Food and Feed Code LFGB (EU 1935/2004)). The NANO turbine can measure flow rates up to 0.04 liters per minute at temperatures not exceeding 65°C.

ORDER CODE:
93N-6211/1100

Price on request

Request dimensioning and quote

Print product sheet

Product features
Principle of measurement	Turbine
Informations measured	Volumetric flow, Volume
Detection type	Continuous measurement
Measurable media	Coffee, Water., Aggressive Liquids, Demi water, (the indications on liquids are indicative and vary with the configuration of the product)
Documentation included	English instructions manual
Explosion protection	Safe zone
Minimum process fluid temperature	0 °C
Maximum process fluid temperature	65 °C
Minimum process pressure	-1 Bar
Maximum process pressure	0,3 Bar
Version	Without pulse divider
Mounting	On pipe
Measurement site	Conduct
Measurement type	With contact
Ambient temperature	0...+65°C
Sensor type	Hall-effect sensor
Flow max (liquid)	0,4 L/min
Flow min (liquid)	0,08 L/min
Installation position	Vertical, Horizontal
Flow direction	Unidirectional
Durability	Mimimun 3.000 liters at 0,4 lt/min
Details of the signal inputs and outputs
All signal outputs available	NPN Pulses
Signal Output Type	Pulse/frequency
Details of the signal outputs	Square wave NPN type signal with 50% duty cycle
Pulse factor	48000 imp/L
Output details	1 x NPN Open collector
Digital output functions	Volume
Digital output type	NPN
Number of digital outputs	1
Switchable current	20 mA
Electrical data
Voltage type	12 Vdc
Type of electrical connection	Pancon Hallcon plug
Reverse polarity protection	No
Max current consumption	0,008 A
Operating voltage	3,0...20 Vdc
Mechanical data
Process connection type	Nozzle
Diameter process connection	ø 6,0 mm
Nominal pressure (PN)	PN0,3
Materials in contact with the measured fluid	PP - Polypropylene, PVDF (KYNAR®) - Polyvinylidene fluoride
Seal materials	N/D
Body material	PP - Polypropylene
Height	25 mm
Width	33 mm
Depth	12,5 mm
Impeller material	PVDF (KYNAR®) - Polyvinylidene fluoride
Bearings materials	None
Axle/shaft materials	PP - Polypropylene
Diameter of the nozzle	1,1 mm
Materials of the magnets	CERAMIC - Ceramics, Fe - Iron, O - Oxygen, Sr - Strontium
Performance data
Accuracy	±2,0% Full scale
Maximum pressure drop	0,31 Bar
Omologazioni
Naval approvals	None
Food / pharmaceutical approvals	LFG (EU 1935/2004, EU 2010/2011), Certificated to NSF/ANSI 61 Section 9-G
Atex approvals	None
Standards and Certifications	RoHS, Directive 2014/35/EU “Low voltage Directive”, IEC 61000-6-3:2006 (second edition)
EMC applied harmonized standards	EN 55014-1:2000/A1:2011/A2:2002, EN 61000-6-3:2001/A11:2004, EN 61000-3-2:2006, EN 61000-3-3:1995/A1:2001/A2:2005, EN 55014-2:1997/A1:2001, EN 61326: 2002
CE omologation	Yes
Low voltage applied harmonized standards	IEC/EN 60335-1: 2001/2002 + A1: 04+A2: 06+A11: 04+A12: 06.
Rohs applied harmonized standards	EN IEC 63000:2018
Logistics
Type of packaging	Carton BOX
Contains batteries	No
country of origin	Switzerland
Customs Code	90261021
Gross weight	0,2 kg
Net weight	0,1 kg
Packaging volume	0,001 m³
Packing length	11 cm
Packaging width	12 cm
Packaging depth	5 cm

Attachment	Format	Size
Datasheet (English)	pdf	298.68 KB	Download

Accessories

G2X Full and Instant Range Viewer

Price on request

The G2X is a total and instantaneous flow viewer with NAMUR, NPN/PNP inputs, and outputs of 4÷20 mA, 0÷10 V, RS232, and RS485. It features a 6-digit display, two alarm thresholds with relay output, and allows for the selection of instantaneous or total flow reading.

Atex approval Only safe zone
Inputs NPN, PNP, NAMUR pulses
Mouting panel
Display 6 digits

Measurement techniques

See all >

March 3, 2023

Food industry

With hygienic sensor solutions made of stainless steel, Riels® Instruments meets the high hygiene requirements in the food industry. We ensure continuous and lasting safety, solving chemical and thermal resistance challenges to protect products and processes.

March 1, 2023

Water & Wastewater

Water is a precious commodity. Monitoring of water resources is very important and Riels® Instruments supplies sensors for measuring flow, level, pressure in the water and wastewater treatment sector.

March 1, 2023

Chemical & Pharmaceutical Industry

In the chemical and pharmaceutical industry, excellence requires cutting-edge technologies. Riels® Instruments, with its wide range of instruments for industrial automation, satisfies every need, guaranteeing rigorous safety and precision standards.

February 28, 2023

Oil & Gas | Offshore

Oil and gas fuel industry and the progress of civilization. In the mining and refining sector, with tankers and pipelines, safety is paramount. We are committed to ensuring high safety standards to support the oil industry and its vital role in modern society.