Home
Brand
Bio-tech
FCH-midi-POM Turbine flow meter - 97478940

FCH-midi-POM Turbine flow meter - 97478940

FCH-midi-POM Turbine flow meter for diesel fuel, fuel oils, glycol, water

ORDER CODE:
97478940

Technical specifications based on the configuration

Measuring range 0,1...10 l/min

Process temperature -20...+80°C

Signal output Push-pull NPN/PNP - 950 p/lt

Process pressure -0,7...6 bar

Thanks to the POM body, the PVDF impeller and the FKM seals, the FCH sensor can be used to monitor the flow rates of water, glycol, diesel and general fuel oils.

The sensor works in a temperature range from -20 °C up to 100 °C and withstands a maximum pressure of 6 bar. The internal diameter of 6 mm allows to work with flow rates up to 10 l/min with a wide rangeability from 1: 100.

The turbine has a good repeatability of ±0.5% and an accuracy of ±2% which can be improved by performing a calibration in the field by modifying the calibration factor.

The sensor is powered at 24Vdc and the output signal is NPM/PNP push-pull type.

For use, a close-mesh filter of about 200 mesh is recommended to avoid compromising the internal helix and it is essential to maintain straight sections before and after the installation of the sensor to ensure its accuracy and repeatability.

ORDER CODE:
97478940

Price per Unit

€73.00(Vat excluded)

€89.06(Vat included)

Qty	Unit price (Vat excluded)	Unit price (Vat included)
1	€73.00	€89.06

Availability

25 working days

Quantity

Can't find the right configuration? Ask for a quote.

Print product sheet

Product features
Principle of measurement	Turbine
Informations measured	Flow.
Detection type	Continuous measurement
Measurable media	Diesel Fuel, Fuel Oils, Glycol, Water., (the indications on liquids are indicative and vary with the configuration of the product)
Explosion protection	Safe zone
Minimum process fluid temperature	-20 °C
Maximum process fluid temperature	80 °C
Minimum process pressure	-0,7 Bar
Maximum process pressure	6 Bar
Measurement type	With contact
Ambient temperature	-20...+80°C
Sensor type	Hall-effect sensor
Overpressure	10 Bar
Flow max (liquid)	10 L/min
Flow min (liquid)	0,1 L/min
Installation position	Vertical, Horizontal
Flow direction	Unidirectional
Details of the signal inputs and outputs
All signal outputs available	NPN Pulses, PNP pulses
Signal Output Type	Pulse/frequency
Details of the signal outputs
Pulse factor	950 imp/L
Electrical data
Voltage type	24 Vdc
Type of electrical connection	Connettore GDSN 207 2 pin + Ground
Reverse polarity protection	No
Max current consumption	0,015 A
Operating voltage	5...24 Vdc
Mechanical data
Process connection type	Threaded BSP(M)
Diameter process connection	1/4" - DN6
Nominal pressure (PN)	PN6
Materials in contact with the measured fluid	FKM (VITON®) - Copolymer of vivilidene fluoride, POM - Acetal resin, PVDF (KYNAR®) - Polyvinylidene fluoride, SS 316 - 316 stainless steel
Seal materials	FKM (VITON®) - Copolymer of vivilidene fluoride
Body material	POM - Acetal resin
Height	48,9 mm
Width	76,8 mm
Depth	40,1 mm
Impeller material	PVDF (KYNAR®) - Polyvinylidene fluoride
Bearings materials	POM - Acetal resin
Axle/shaft materials	SS 316 - 316 stainless steel
Diameter of the nozzle	6 mm
Performance data
Accuracy	± 2% Full scale
Repeatability	± 0,5% Full scale
Maximum viscosity of the measured fluid	20 mPas
Minimum viscosity of the measured fluid	0 mPas
Approvals
Naval approvals	None
Food / pharmaceutical approvals	None
Atex approvals	None
Standards and Certifications	RoHS, Directive 2014/35/EU “Low voltage Directive”, Directive 2014/30/EU “Electromagnetic compatibility Directive”
EMC applied harmonized standards	EN 61326 (For industrial applications)
CE omologation	Yes
Low voltage applied harmonized standards	EN 61010-1: 2010
Rohs applied harmonized standards	EN IEC 63000:2018
Logistics
Type of packaging	Carton BOX
Contains batteries	No
country of origin	Germany
Customs Code	90261021
Gross weight	0,135 kg
Net weight	0,035 kg
Packaging volume	0,001 m³
Packing length	11 cm
Packaging width	5 cm
Packaging depth	12 cm