F3.00.X Rotor flow sensor for liquids in small and large diameters with insertion mounting
ORDER CODE:
F3.00.H.01
F3.00.H.01
Protection degree
IP65 or IP68
Signal output
frequency up to 45 Hz
Mouting
ad insertion
Measuring range
0.15...8 m/s
The F3.00.X range is a range of products that can be installed on plastic or steel pipes up to 24"-DN600 in diameter. The output signal is in frequency up to 45 Hz.
The sensors can be connected to multiple types of instrumentation, depending on the configuration:
- F3.00.H: hall effect sensors, can be connected to M9.02 and M9.50 displays
- F3.00.,C: coil sensors, can be connected to battery-powered displays due to low operating voltage and low current consumption
- F3.00.P: push-pull sensors, suitable for direct connection to a PLC
The products in addition can be configured according to application needs by changing the following aspects:
- Body material: PVC-C, PVDF or AISI 316 (for pressures up to 25 bar)
- Gasket material: EPDM or FKM
- Sensor length: L0 or L1 (to be chosen according to the specifications of the fitting used)
- Degree of protection: IP65 or IP68
ORDER CODE:
F3.00.H.01
F3.00.H.01
Price per Unit
€273.00(Vat excluded)
€333.06(Vat included)
| Qty | Unit price (Vat excluded) |
Unit price (Vat included) |
|---|---|---|
| 1 | €273.00 | €333.06 |
CONFIGURE THE PRODUCT
In this section you will find all the variants available for this model, improve your configuration with the drop-down menus below, select the desired quantity and click on "ADD TO CART or REQUEST A QUOTE"
The price displayed refers to a specific configuration and changes based on the variants selected.
The configuration follows an indicative order. Configure the product according to your needs.
