| Principle of measurement |
Pressure |
| Informations measured |
Level, Pressure |
| Detection type |
Continuous measurement |
| Measurable media |
Air, Diesel, Hydraulic Oil (Petro), Natural Gas, Water., (the indications on liquids are indicative and vary with the configuration of the product) |
| Explosion protection |
Xd atex |
| Pressure type |
Absoluta |
| Minimum process fluid temperature |
-30 °C |
| Maximum process fluid temperature |
100 °C |
| Maximum measurable pressure |
1 Bar |
| Measurement type |
With contact |
| Storage temperature |
-10...+80 °C |
| Ambient temperature |
-30...100 °C |
| Sensor type |
Piezoresistive silicon sensor |
| Properties of the fluid |
Viscous / Sticky, Aggressive, Presence of suspended solids |
| Minimum measurable pressure |
0 Bar |
| Area of use |
For ATEX Zone 2 atmospheres |
| All signal outputs available |
RS485, 4...20 mA, 0...10 Vdc |
| load resistance |
(U-8 V) / 0,025 A ( > 5 k per uscita 3 fili) |
| Output details |
1 x Modbus + 1 x Analog 4...20 mA |
| Voltage type |
24 Vdc |
| Reverse polarity protection |
No |
| Degree of protection |
IP50 |
| Insulation resistance |
> 10 MΩ @ 50 V |
| Cable details |
PUR cable, length 2 m (with PE sheath and reference tube for pressure gauge). Other types of connection upon request |
| Operating voltage |
8...32 Vdc (2 wires 4-20mA) 13...32 Vdc (3 wires 0-10V) 3,2...32 Vdc (digital RS485) |
| Process connection type |
Threaded GAS(M) |
| Diameter process connection |
1/4" - DN6 |
| Materials in contact with the measured fluid |
AISI 316L (1,4435) - Stainless steel, FKM (VITON®) - Copolymer of vivilidene fluoride |
| Seal materials |
FKM (VITON®) - Copolymer of vivilidene fluoride |
| Diaphragm material |
AISI 316L (1,4435) - Stainless steel |
| Oil filling |
Silicone oil |
| Body material |
AISI 316L (1,4435) - Stainless steel |
| Height |
82 mm |
| Width |
34 mm |
| Depth |
34 mm |
| Case material |
AISI 316L (1,4435) - Stainless steel |
| Cycles of measurement |
> 10 milioni di cicli a 25 °C |
| Accuracy |
0,03 % Full scale for analog sensor 0,02 % Full scale for digital sensor |
| Reference precision (total error) |
0,1 % Full scale for analog sensor (10…40 °C) 0,05 % Full scale for digital sensor (10…40 °C) 0,15 % Full scale for analog sensor (-10…80 °C) 0,1 % Full scale for digital sensor (-10…80 °C) |
| Long-term stability |
0,1 %FS typ (FS > 1 bar) 1 mbar typ (FS ≤ 1 bar) |
| Naval approvals |
None |
| Food / pharmaceutical approvals |
None |
| Atex approvals |
ATEX / Europe |
| Standards and Certifications |
Directive 2014/30/EU “Electromagnetic compatibility Directive” |
| EMC applied harmonized standards |
EN 61326 (For industrial applications) |
| CE omologation |
Yes |
| Low voltage applied harmonized standards |
EN 61010-1: 2010 |
| Rohs applied harmonized standards |
EN IEC 63000:2018 |
| Atex details |
II 2 G Ex db IIC T6 to T4 Gb | EPS 22 ATEX 1 007X | IECEx EPS 22.0002X | EPS 22 UKEX 1 007X |
| Type of packaging |
Carton BOX |
| Contains batteries |
No |
| ETCN |
N/D |
| country of origin |
Italy |
| Customs Code |
90262020 |
| Gross weight |
0,6 kg |
| Net weight |
0,2 kg |
| Packaging volume |
0,007 m³ |
| Packing length |
26 cm |
| Packaging width |
21 cm |
| Packaging depth |
13 cm |
